More on my wearable

Started thinking a bit more about my idea for a wearable 3D item. I say 'wearable' because although I'm aiming for a dress we'll see how it develops and ends up. I looked at the red/green monoprint pattern and began to try ways of creating the effect while maintaining the lacy feel. This photo shows my planning board which is keeping me focussed.

I simplified the main green motif in a drawing then prepared it in green and red chiffons and organzas in various sizes, sewn on water soluble fabric then cut out by soldering. This will keep the translucency of the layers.

I placed the motifs onto a 'red' background and felt that more 'obvious' lacework was required so chose to sew the meandering green line of the pattern in an open green lace. I've tried a couple of further lace patterns below in pinks/reds create layers.

In this first idea the fabric will consist of two layers - 1 the motifs and lacework will be an entity of its own and 2 the under layer of reddish organza and chiffon. The under layer needs to have a bit more texture / pattern akin to the original monoprint but I don't want to detract from the upper lacework. I've only randomly tucked and pleated the organza then soldered slits in it to change the colour.

I've also looked at creating the pattern on one fabric where I've used painted Lutradur, resist embroidered then heat gunned away the rest. The linking 'vine' is a couched cord made from red organza. I like the lacy effect but it feels 'crusty' as you'd imagine after melting a polyester web so not sure if it's a suitable choice for a 'wearable'. The background dyed cotton has texture from dyed Saa bark but would need to be darker in colour.

The straps could be principally a braid perhaps with threaded motifs echoing those in the dress. The photo is a bit dark but I've tried a 5 stranded braid using machined cords in green and red and that seems to be a suitable width. I've tried the red motifs in different thicknesses with and without interfacing, and tried lacing them differently.

And with so much pattern I thought the bodice area should be fairly plain, perhaps rouched or pleated chiffon.

By the way, the dress is only partly coloured in - it's not as daring as it looks!

Towards an embroidered item

I prepared an A3 size piece of material (top left corner of Page 12A below) from fabric pieces overlaid with fine netting and free machine and cable stitching. Shapes (derived from the black and white bark lace drawing in chapter 11) were cut out and edged in fushia machine buttonhole stitch. These shapes were arranged in various compositions and temporarily sewn together to give the impressions of 3D items.

Page 12A:

Page 12B:
Another piece of material was prepared in a complementary colour scheme, the shape (UFO-like) taken from a monoprint design in chapter 11.
Various compositions are shown combining the two shapes in this page and the next (page 12C)


Page 12C:


Page 12D:
I took these compositions, scaled up and down, and suggested their use in various clothes and accessories eg. bags, hats, scarves, and earings.

Bold marks

Since I had some interesting papers already made I decided to look at those marks in closer detail for this section of design.

Page 11A (above):
The paper was decorated with sweeping broad brush strokes in acrylic paint on an inked background. I cropped two areas which had overlapping strokes and played around ending up with quite leafy looking border patterns and flowerlike motifs.


Page 11B:
I picked a square cropped area from a paper that had been monoprinted in several layers. The repeated shape gave endless designs but I've highlighted 3 above that again had a leafy theme of creepers and vines, etc. Since the original monoprint was made with pigmented gel medium, the reddish background (if you enlarge it) has a lot of interesting texture in it which I like.

Page 11C:

I also went back to some monoprints of Saa (mulberry) bark, cropped parts and played around in positive and negative designs. The laciness (if that's a word) really appealed to me and so I looked at that further.

Page 11D:

I looked at simplifying the cropped bark monoprint before replicating in a line drawing here.

I've then overlaid that image onto design 11.7 on page 11B using cellophane.

Design with Image copies

It might seem like I'm working 24 hours/day at the moment but really only now piecing together the story around designs I created before summer school. I thought it helped to keep the heap 'flexible' but actually my brain just copied the heap and got more confused. Hopefully this will give me direction now.


Page 10A:
I took my photo of coloured leaves, cropped two similar but different images from it, grayscaled and colourwashed them in theme colours. These were enhanced with crayon and bleach marks then cut up into sections resembling branches. Each enhanced page was A5 in size as in bottom right of page.



Page 10B:
These pieces were arranged in interesting designs (10.1 to 10.6). The designs were about A4 in size but were reduced for the A3 page.



Page 10C:
The designs from 10B were further enhanced with pen, crayon and paint marks to link the pieces. The marks resembled leaf shapes. The designs can be seen in more detail by clicking on the page to enlarge it.



Page 10D:
I looked at design 10.10 on the previous page further. I printed the scanned decorated paper image on to vellum to exploit the translucency, creating more layers, and enable the positive and negative leaf shapes to appear from underneath. In retrospect the original decoration of the image is a bit lost on the dark green background, perhaps confused further by the additional cable stitching in the background.
The leaf shapes are created on top with cable stitch and the fushia pink marks replacing the original leaf stamp have been half stitched / half woven.



Page 10E:
I played further with design 10.10 by cropping two smaller interesting sections from it which had clearer shapes, making repeated copies flipped and unflipped. The result is, or course, 70s wallpaper but I like the band / border designs created in 10.14 and 10.15, and the motifs in 10.16, particularly the one created by the lacy white leaf shapes, I think are worth taking further.

Chapter 9 - Design with abstracted fragments

Planned to post up this work before mounting on formal pages but realised that too many photos would have been required and the post way too lengthy. So here are the summary pages from the work which enlarge a little if you click on them.


Page 9A (above):
I picked a line drawing (9.1) from my sketchbook of saprophytes to develop, abstract and manipulate in Photoshop.


Page 9B:
Looked at design 9.9 from the previous page in various colour combinations of my colour scheme.

Page 9C:

Went back and did the exercise again with another design of flowing lines taken from my favourite wiggly tree. The photo below shows the original design idea in more detail.

Page 9D:

Selected two twisted manipulations (9.18 and 9.19 on page 9D) and looked at colour combinations again. I felt these looked more promising and related back to flowing branches, vines, etc more easily.

Page 9E:

Took design 9.19 and explored the colour fragments further on a larger scale using my decorated papers. Tried to combine some fragments in similar papers within a complementary coloured background - but feel that there is too much pattern here to produce clear designs.

Page 9F:

Presented the most interesting shapes from combined fragments on at the top of the page. Realised that the interest probably lies not in the shape itself but in the movement portrayed by the fragments.
The rest of the page looks at extrapolated designs from this with some texture and relief to give movement in the design. Must try not to keep on returning to coils and spheres, though!