Shisha vs machine

Yes, I plucked up the courage, found the safety glasses from my lab days, and had a nervous go at sewing around those mirrors.  I think it's a bit like standing on the edge of a cliff - no matter how much you try not to you keep seeing yourself jumping off.  I concentrate like mad and still see the needle veering towards the glass.
If truth be told (and you look closely) I actually only machined around mirrors in 2 of the samples - and that was after I had practised with 2 samples using metal foil, just incase.....  Still, I persevered....

Incidentally, all these samples and the others 7.1-7.5 in the previous post are about 20cm x 20cm in size.

7.6

7.6 My first practice go - Red bobbin thread and yellow top tighter tension in star formation over shisha of gold foil.

 

7.7

  

7.7 (detail)



7.7 The back ground in this one has spiral pattern of a rubbing with gold oil pastel. Free machine swirls made over a metallic organza entrapping glass pebbles then areas of the sheer cut away to reveal the pattern underneath.  I made a hole over one of the pebbles to make it more shisha-like but decided that I preferred the covered look on the others.

7.8

7.8 Background rubbing in gold pastel over one of my blocks from before.  Then shisha mirrors trapped under machine couched tramlines of red perle cotton.  Further free machining done on top in metallic thread echoing the rubbing marks - not as clear as I had hoped unfortunately.

7.9



7.9 detail

 7.9 Green and gold pastel rubbing on olive green dyed cotton background. Echoing swirls in metallic free machining.  Fragments of broken mirror that I already had from a mosaic class hand sewn with gold seed beads and gold thread.  Shisha mirrors machine sewn in star formation in centre and then the rubbing marks emphasised in hand blanket stitch using gold embroidery thread.
I do like the way that the beads (in the detail photo) are reflected in the mirror.

7.10

7.10 In this sample the gold foil shisha are held down with overlapping jump rings cut from a metal purl I made around a pencil.  they are hand stitched on then free machining in whip stitch with red bobbin thread on top echoes the ring patterns and the rubbing markings on the fabric.  The fabric is the same green as in 7.9 but the photo makes it appear brownish here.

Contemporary Shisha by hand

I had fun finding contemporary things that could be embroidered onto fabric like shisha mirrors - not always shiny or reflective but at least they were roundish, well at least they were at the start.

7.1

7.1 The top row shows individual aluminium blisters (from a strip pack of medicinal tablets) held by buttonhole stitch in gold perle.
The middle row shows the bottom rounds of egg boxes as shisha, held by crossed stitches of gold purl with interlacing in the centre.
The bottom row uses the little stickers found on kiwi fruit in place of mirrors under gold lurex twisted and stitched across mimicking the stamped pattern on the background.

7.2

7.2 uses the same stamp on the background.  On the far right the diagonal row has cast bark circles as shisha.  This was my attempt at linking things back to my research theme of vegetation and trees.  There is a huge eucalypt in our garden that has little lumps and indentations all over the trunk. When the bark is cast off every year these little circular bark pieces drop off like counters.  Here they are attached by interlacing jute string.
The other 2 diagonal rows have shisha 'parcels' of copper shim and copper mesh held down by short sections of gold wire purls couched down at each end.

7.3

7.3 The background pattern here was created by rolling of the roller after it had inked the stamp.  The circuit pieces came from an old digital camera and I have held them down with 24 gauge brass wire.  Not exactly round or sparkly but definitely contemporary!

7.4

7.4  I thought about the Indian relevance in these contemporary samples and used small images of Indian henna painted hands in place of shisha in the relief rubbing patterns.  Each hand is held down by a crosshatch of gold lurex thread to create square outlines copying the checkerboard pattern in the henna design.  The squares theme is repeated in the stamping on the background, the square pieces of brass mesh and the square embroidery around the shisha mirrors in the centre of each motif.  One mirror has the square edged in buttonhole stitch, and the other has the buttonhole stitch in the opposite configuration.

7.5

7.5  OK, these 'shisha' can't exactly be called round but they are shiny - pieces of CD, the country songs of which I am now saved from - I think they've gone to a better place!
The left motif using the shape of my stamp again, have the pieces outlined by chain stitch then held in place by the pink floss interlaced through those stitches.
On the right, loosely based on another motif from the original embroidery, the pieces were held by green herringbone stitches interlaced.  The spaces between these pieces have been laced further with pink floss.  I like the fractured look to the piece and where the foil has peeled away from the CD perspex.

Sketchbook finally felted!

I've finally dressed my nude A3 sketchbook from Module 1 with the piece of nunofelt that I made in Orange in April.

I made a sleeved jacket for the ring binder using interfaced homespun cotton on the inside that had been hand dyed.  The raw edges were folded over on all 4 sides of the sleeve panel then stitched in place on 3 sides to give the pocket for the folder cover.

All my A3 sheets seemed better protected in plastic sleeves this way plus I could have an envelope sleeve at the back to hold all the little samples I did while working on my dress.
It also means I can add to the folder if I need to.

Decorative details from indian textiles- chapter 6

I used the relief blocks made previously to create decorated papers 6.1 to 6.8 based on Indian enbroidery themes.

These rubbing images above use Markal sticks on black and gold tissue paper and on black crepe paper.  In some I repeated the same image, others used several block rubbings together.

In 6.9 (above left), the paper was pleated then repeat rubbings made before opening out the paper again.  In 6.10 (above right) a strip collage was made using pieces from 6.3 and 6.4.

6.11

6.12

6.11 and 6.12 and 6.13 have stamped prints in gold acrylic (6.12 pleated before stamping) over the layer of rubbings.

6.13

I suspect that smaller areas of these papers will be more interesting for further study later in the module, rather than the whole piece eg as in the section below.

6.14

Shi-sha embroidery

I had some difficulty in finding an example of Indian embroidery to study "in the flesh" that was authentic, so I resorted to the internet and found some good closeups of embroidered fabric.  That along with a few reference books ("Embroidered Textiles" by Sheila Payne and "Indian Embroidery" by Rosemary Crill) from the library gave me a good idea of the stitches involved.

5.1

My study embroidery is in the centre of this photo (5.1) and my drawings in black pen and white ink are scattered around.  The colour was added generally by pigment pencils and washed over with water.

5.2

In 5.2 I drew with a kebab stick dipped in bleach on black handmade paper (left).  I had this paper left over from the Certificate studies when I had dyed the pulp with black procion dye.  The image I was recreating (centre) was drawn in Markal oil sticks as a resist over a texture plate (right) then washed with brusho solution. 

5.3

In 5.3 I used the Markal sticks over the same plate on black tissue paper.  I felt the rubbing gave patterns very similar to the original white chain stitch on black.

5.4

5.4 shows a few relief patterns that I made using translucent liquid polymer clay (TLPC) on cardboard. This polymer clay is intended to allow patterns / pictures to adhere permanently onto polymer clay for jewellery pieces or other motifs, but I've never used it for that purpose.  I produce weblike structures that can stand on their own for 3D work or attach onto hangings etc.  If spread thinly enough the sheet is flexible, can be cut easily, stitched through and even better the tranlucent base can be coloured with pigments before curing or painted afterwards.  Oh, I could go on for ages - love the stuff.  I taught a workshop last month and the TLPC kind of took over for some ladies!
Anyway, here on cardboard it's fixed itself, won't peel off and so produces a useful stamp / relief block. 
The rubbings in 5.4 show that a constant line is not produced but I like that incomplete look to the patterns.

5.5

5.5 shows three relief blocks made with blind cord on lino tiles.  The tiles are great because the stamp has a bit of flexibility (a bit like monoprinting with Ruth on flexible acetate - what a revelation that was for me!).
The rubbings are made using pastels or wax crayons on tissue paper or thin paper bags.

5.6

5.6 - The block (the green one in the bottom right of photograph) was made from an easy carve block.  The other pattern is cut on the other side of the block.  The prints are made using (clockwise from bottom right) rubbings on black tissue paper with white and gold Markal and white wax crayon, monoprints with green acrylic on paper, and rubbings on inked paper with Markal.

5.7

5.7 I had a go at replicating some of the designs in my study shi-sha mirrored embroidery.  The background fabric was dyed homespun and a little chlorine was used to trace the outline shapes for embroidery.
The sample piece includes normal chain stitch, open chain stitch, back stitch, buttonhole stitch, normal herringbone and Indian (double) herringbone stitch, roman stitch over laidwork and couching in addition to shisha stitch around the mirrors.  Not so sure I like the colour scheme but it's true to the original.